Assignment #4: Design and Simulation of Adder Circuits

VHDL Assignment #4 1
VHDL Assignment #4: Design and Simulation of Adder Circuits
In this lab, you will implement a 4-bit ripple-carry adder in VHDL using both behavioral and structural
descriptions.
1 Learning Outcomes
After completing this lab you should know how to
• Synthesize logic functions
• Use CAD tools and VHDL to implement ripple-carry adders
• Perform functional simulation
2 Prerequisites
Before starting this lab you should
• Read the posted lecture slides (Lecture #13) and the corresponding textbook sections related to
adder circuits.
• Be familiar with the information in previous coding assignments.
• Read Sections 5.5.2, 5.5.3, and 5.5.4.
If you need any help regarding the lab materials, you can
• Ask the TA for help during lab sessions on office hours.
• Refer to the text book. In case you are not aware, Appendix A “VHDL Reference" provides detailed
information on VHDL.
• You can also refer to the tutorial on Quartus and ModelSim provided by Intel (click here for Quartus
and here for ModelSim).
It is highly recommended that you first try to resolve any issue by yourself (refer to the textbook and/or
the multitude of VHDL resources on the Internet). Syntax errors, especially, can be quickly resolved by
reading the error message to see exactly where the error occurred and checking the VHDL Reference or
examples in the textbook for the correct syntax.
McGill University ECSE 222 – Digital Logic (Winter 2020)
VHDL Assignment #4 2
3 Structural Description of a 4-bit Ripple-Carry Adder
In this section, you will implement a structural description of a 4-bit ripple-carry adder out of basic
addition components: half-adders and full-adders.
3.1 Structural Description of a Half-Adder in VHDL
A half-adder is a circuit that takes two binary digits is inputs, and outputs the result of the addition
of the two digits in the form of sum and carry signals. The carry signal represents an overflow into the
next digit of a multi-digit addition. As a first step to build a structural description of a 4-bit ripple-carry
adder, implement a structural description of the half-adder in VHDL using the following entity definition
for your VHDL code:
l i b r a r y IEEE;
u s e IEEE.STD_LOGIC_1164.ALL;
u s e IEEE.NUMERIC_STD.ALL;
e n t i t y firstname_lastname_half_adder i s
P or t ( a : i n s t d _ l o g i c ;
b : i n s t d _ l o g i c ;
s : o u t s t d _ l o g i c ;
c : o u t s t d _ l o g i c ) ;
end firstname_lastname_half_adder ;
After you have described your structural style of the half-adder in VHDL, you are required to test
your circuit. Write a testbench code and perform an exhaustive test for your VHDL descriptions of the
half-adder.
3.2 Structural Description of a Full-Adder in VHDL
You will now implement a full-adder circuit. Unlike the half-adder, a full-adder adds binary digits while
accounting for values carried in (from a previous stage addition). Write a structural VHDL description
for the full-adder circuit using two instances of the half-adder circuit that you designed earlier. Use the
following entity declaration for your structural VHDL description of the full-adder:
l i b r a r y IEEE;
u s e IEEE.STD_LOGIC_1164.ALL;
u s e IEEE.NUMERIC_STD.ALL;
e n t i t y firstname_lastname_full_adder i s
P or t ( a : i n s t d _ l o g i c ;
b : i n s t d _ l o g i c ;
c_in : i n s t d _ l o g i c ;
s : o u t s t d _ l o g i c ;
c_out : o u t s t d _ l o g i c ) ;
end firstname_lastname_full_adder ;
McGill University ECSE 222 – Digital Logic (Winter 2020)
VHDL Assignment #4 3
After you have described your circuit in VHDL, write a testbench code and perform an exhaustive
test for your VHDL descriptions of the full-adder.
3.3 Structural Description of a 4-bit Ripple-Carry Adder (RCA) in VHDL
After you have implemented both the full-adder and the half-adder circuits in VHDL, implement a 4-bit
carry-ripple adder using instances of these basic components (i.e., full-adder and half-adder components).
Write a structural VHDL code for the 4-bit RCA using the following entity declaration:
l i b r a r y IEEE;
u s e IEEE.STD_LOGIC_1164.ALL;
u s e IEEE.NUMERIC_STD.ALL;
e n t i t y firstname_lastname_rca_structural i s
P or t ( A : i n s t d _ l o g i c _ v e c t o r (3 downto 0) ;
B : i n s t d _ l o g i c _ v e c t o r (3 downto 0) ;
S : o u t s t d _ l o g i c _ v e c t o r (4 downto 0) ) ;
end firstname_lastname_rca_structural ;
Note that S(4) contains the carry-out of the 4-bit adder. After you have described your circuit in VHDL,
write a testbench code and perform an exhaustive test for your VHDL descriptions of the 4-bit RCA.
4 Behavioral Description of a 4-bit RCA in VHDL
In this part, you are required to implement the 4-bit RCA using behavioral description. One way to obtain
a behavioral description is to use arithmetic operators in VHDL (i.e., “+”). Write a behavioral VHDL
code for the 4-bit RCA using the following entity declaration for your behavioral VHDL description:
l i b r a r y IEEE;
u s e IEEE.STD_LOGIC_1164.ALL;
u s e IEEE.NUMERIC_STD.ALL;
e n t i t y firstname_lastname_rca_behavioral i s
P or t ( A : i n s t d _ l o g i c _ v e c t o r (3 downto 0) ;
B : i n s t d _ l o g i c _ v e c t o r (3 downto 0) ;
S : o u t s t d _ l o g i c _ v e c t o r (4 downto 0) ) ;
end firstname_lastname_rca_behavioral ;
After you have described your circuit in VHDL, write a testbench code and perform an exhaustive
test for your VHDL description of the 4-bit RCA.
McGill University ECSE 222 – Digital Logic (Winter 2020)
VHDL Assignment #4 4
5 Deliverables and Grading
Read this section extra carefully!
You are required to submit the following files through myCourses:
• A report that includes the answers to the questions in Section 6. Use the report template (provided
in .docx format) that is attached to the assignment. Make sure that all figures are clearly visible
and contain relevant information (e.g., axes and relevant signal names). Save your report in a .pdf
format (include your name in the filename).
• All design files (.vhd)
• All schematic files (.bdf)
• All testbench files (.vht)
Per the VHDL assignments submission policy, please note
• For partially submitted assignments, i.e., some of the files (design/simulation/report) are missing,
the penalty is 25% of the full mark of the assignment.
• For assignments where all the design/simulation files are missing, i.e., only a report was submitted,
the penalty is 50% of the full mark of the assignment.
• For not submitted assignments, i.e., all files are missing, the penalty is 100% of the full mark of the
assignment.
6 Questions
1. Report the number of pins and logic modules used to fit your designs on the FPGA board. (1 mark)
Half-Adder Full-Adder 4-bit Ripple Carry Adder
Structural Structural Structural Behavioral
Logic Utilization (in ALMs)
Total pins
2. Provide the VHDL code that you wrote to instantiate the half-adders in Part 3.2 and the full-adders
in Part 3.3. (1 mark)
3. Show representative simulation plots of the half-adder circuit for all the possible input values. (1
mark)
4. Show representative simulation plots of the full-adder circuit for all the possible input values. (1
mark)
5. Show representative simulation plots of both the behavioral and structural 4-bit ripple-carry adder
descriptions for all the possible input values. (1 mark)