Starting from:

$30

Data Structures – Assignment#21

CS/COE 445 Data Structures

CS 445 – Data Structures – Assignment#21
OVERVIEW
Purpose: To give you experience implementing and using linked data structures.
Goal 1: To design and implement a class LinkedDS<T that will act as a linked data structure for
accessing Java Objects. Your LinkedDS<T class will primarily implement two interfaces – PrimQ<T and
Reorder. The details of these interfaces are explained in the files PrimQ.java and Reorder.java. Read
these files over very carefully before implementing your LinkedDS<T class.
Goal 2: To utilize your LinkedDS<T class to store and manipulate arbitrary length hexadecimal
numbers. We can think of a hexadecimal number as a sequence of hexadecimal digits. For example, the
number BEEF could be stored as the digit 'B' followed by the digit 'E' followed by the digit 'E' followed by
the digit 'F'. We can store these digits in an array, or, as is required in this assignment, in a linked
chain. Clearly, to perform operations on a number that is stored in this fashion, we must access the
digits one at a time in some systematic way. More specific details follow below.
DETAILS
Details 1: For the details on the functionality of your LinkedDS<T class, carefully read over the files
PrimQ.java, Reorder.java, and Assig2A.java provided on the CourseWeb folder where you find this
assignment description. You must use these files as specified and cannot remove/alter any of the code
that is already written in them. There are different ways of implementing the PrimQ<T and Reorder
interface methods, some of which are more efficient than others. Use only the best way of
implementing these methods in this assignment. A lot of pencil and paper work is recommended before
actually starting to write your code. Your LinkedDS<T class header should be:
public class LinkedDS<T implements PrimQ<T, Reorder
The only instance variables allowed inside the LinkedDS<T class are
protected Node firstNode;

1 Assignment adapted from Dr. John Ramirez’s class.
2
protected int numOfEntries;
Important Note: The primary data structure within LinkedDS<T class must be a linked chain. You
may not use any predefined Java collection class (e.g., ArrayList) for your LinkedDS<T data.
Note that the following methods are added to the Reorder interface in this assignment as compared to
Assignment 1.
public void leftShift(int num)
Shift the contents of the list num places to the left (assume the beginning is the leftmost node),
removing the leftmost num nodes. For example, if a list has 8 nodes in it (numbered from 1 to
8), a leftShift of 3 would shift out nodes 1, 2 and 3 and the old node 4 would now be node 1. If
num <= 0 leftShift should do nothing and if num = the length of the list, the result should be an
empty list.
public void rightShift(int num)
Same idea as leftShift above, but in the opposite direction. For example, if a list has 8 nodes in it
(numbered from 1 to 8) a rightShift of 3 would shift out nodes 8, 7 and 6 and the old node 5
would now be the last node in the list. If num <= 0 rightShift should do nothing and if num =
the length of the list, the result should be an empty list.
public void leftRotate(int num)
In this method you will still shift the contents of the list num places to the left, but rather than
removing nodes from the list you will simply change their ordering in a cyclic way. For example,
if a list has 8 nodes in it (numbered from 1 to 8), a leftRotate of 3 would shift nodes 1, 2 and 3 to
the end of the list, so that the old node 4 would now be node 1, and the old nodes 1, 2 and 3
would now be nodes 6, 7 and 8 (in that order). The rotation should work modulo the length of
the list, so, for example, if the list is length 8 then a leftRotate of 10 should be equivalent to a
leftRotate of 2. If num < 0, the rotation should still be done but it will in fact be a right rotation
rather than a left rotation.
public void rightRotate(int num)
Same idea as leftRotate above, but in the opposite direction. For example, if a list has 8 nodes in
it (numbered from 1 to 8), a rightRotate of 3 would shift nodes 8, 7 and 6 to the beginning of the
list, so that the old node 8 would now be node 3, the old node 7 would now be node 2 and the
old node 6 would now be node 1. The behavior for num the length of the list and for num < 0
should be analogous to that described above for leftRotate.
public void reverse()
This method should reverse the nodes in the list.
Note that in the methods above you may not create any new Node objects. The purpose of these
methods is to rearrange the Nodes that already exist. To see how these should work, it is strongly
recommended to draw one or more pictures.
You will also need to write the following constructors:
public LinkedDS()
3
public LinkedDS(LinkedDS<T oldList)
The first constructor simply initializes the list to an empty state, and the second generates a new list that
is a copy of the argument list (copying all of the nodes inside the old list).
Finally, you will need to override the following method:
public String toString();
This method will return a String that is the result of all of the data in the list being appended together,
separated by spaces.
After you have finished your coding of LinkedDS<T, the Assig2A.java file provided for you should
compile and run correctly and should give output identical to the output shown in the sample
executions.
Important Notes:
1) All of your LinkedDS methods must be implemented in an efficient way, utilizing the underlying
linked chain. For example, a poor implementation of a left rotation could be done via repeated
calls to X = removeItem() and addItem(X). However, doing this would require multiple
traversals of the list and has a very bad run-time (think arithmetic series). This and similar
implementations are not allowed and if implemented in this way you will not receive credit.
2) The leftRotate(), rightRotate(), and reverse() methods should NOT create any new Node
objects. Rather, they should move the Node objects currently in the list into other locations. You
may use temporary Node variables for these methods, but you may not create any new Nodes.
Details 2: The second part of this assignment is to write the ReallyLongHex class with the specifications
as given below. You may assume all numbers will be non-negative.
Inheritance: ReallyLongHex must be a subclass of LinkedDS. However, since LinkedDS is generic while
ReallyLongHex is not generic, you should use the following header:
public class ReallyLongHex extends LinkedDS<Character
implements Comparable<ReallyLongHex
Note that rather than T, the underlying element data is now Character. This means that the individual
digits of your ReallyLongHex will be Character objects.
Data: The instance variables for this class are inherited and you may not add any additional instance
variables. You will certainly need method variables for the various operations but the only instance
variables that you need are those inherited from LinkedDS.
Operations: Your ReallyLongHex class must implement the methods shown below. Note that the
compareTo() method is necessary for the Comparable interface.
private ReallyLongHex()
4
The default constructor will create an "empty" ReallyLongHex. Note that this leaves the number
in an inconsistent state (having no actual value), so it should only be used within the class itself
as a utility method (for example, you will probably need it in your add() and subtract()
methods). For this reason it is a private method.
public ReallyLongHex(String s)
The string s consists of a valid sequence of digits with no leading zeros (except for the number 0
itself – special case). Insert the digits as Character objects into your list, such that the least
significant digit is at the beginning of the list. For example, the String "456202" would be stored
in a ReallyLongHex as:
firstNode -- 2 -- 0 -- 2 -- 6 -- 5 -- 4 (note: actual Nodes are not shown but implicit)
public ReallyLongHex(ReallyLongHex rightOp)
This just requires a call to super. However, it is dependent upon a correct implementation of
the copy constructor for the LinkedDS class.
public String toString()
Return a string that accurately shows the Character as we would expect to see it. Based on the
way we have stored the Character, this should be accomplished by going forward through the
list.
To help you out with the assignment, we have implemented the methods above for you, with
comments. See the code in ReallyLongHex.java.
public ReallyLongHex add(ReallyLongHex rightOp)
Return a NEW ReallyLongHex that is the sum of the current ReallyLongHex and the parameter
ReallyLongHex, without altering the original values. For example:
ReallyLongHex X = new ReallyLongHex("123456789");
ReallyLongHex Y = new ReallyLongHex("987654321");
ReallyLongHex Z;
Z = X.add(Y);
System.out.println(X + " + " + Y + " = " + Z);
should produce the output:
0x123456789 + 0x987654321 = 0xAAAAAAAAA
Be careful to handle carries correctly and to process the nodes in the correct order. Since the numbers
are stored with the most significant digit at the beginning, the add() method can be implemented by
first reversing the chains then traversing both chains in a systematic way. This must be done efficiently
using references to traverse the lists. In other words, you should start at the beginning of each
ReallyLongHex and traverse one time while doing the addition. The KEY is that for add() (and subtract())
you should access each Node in the list only 1 time TOTAL. This is true for other methods as well. Think
5
how you can do this with reference variables. Also, be careful to handle numbers with differing
numbers of digits.
public ReallyLongHex subtract(ReallyLongHex rightOp)
Return a NEW ReallyLongHex that is the difference of the current ReallyLongHex and the
parameter ReallyLongHex. Since ReallyLongHex is specified to be non-negative, if rightOp is
greater than the current ReallyLongHex, you should throw an ArithmeticException. Otherwise,
subtract digit by digit (borrowing if necessary) as expected. As with the add() method, you must
implement this efficiently via a single traversal of both lists (after reversing the numbers). This
method is tricky because it can result in leading zeros, which we don't want. Be careful to
handle this case (and consider the tools provided by LinkedDS that will allow you to handle
it). For example:
ReallyLongHex X = new ReallyLongHex("123456");
ReallyLongHex Y = new ReallyLongHex("123455");
ReallyLongHex Z;
Z = X.subtract(Y);
System.out.println(X + " - " + Y + " = " + Z);
should produce the output:
0x123456 – 0x123455 = 0x1
As with the add() method, be careful to handle numbers with differing numbers of digits. Also
note that borrowing may extend over several digits. See RLHTest.java for some example cases.
public int compareTo (ReallyLongHex rightOp)
Defined the way we expect compareTo to be defined for numbers. If one number has more
digits than the other then clearly it is bigger (since there are no leading 0s). Otherwise, the
numbers must be compared digit by digit.
public boolean equals(Object rightOp)
Defined the way we expect equals to be defined for objects – comparing the data and not the
reference. Don't forget to cast rightOp to ReallyLongHex so that its nodes can be accessed
(note: the argument here is Object rather than ReallyLongHex because we are overriding
equals() from the version defined in class Object). Note: This method can easily be implemented
once compareTo() has been completed.
public void mult16ToThe(int num)
Multiply the current ReallyLongHex by 16
num . Note that this can be done very simply through
adding of nodes containing 0's.
public void div16ToThe(int num)
6
Divide the current ReallyLongHex by 16
num . Note that this can be done very simply through
shifting.
To verify that your ReallyLongHex class works correctly, you will use it with the program RLHTest.java,
which will be provided for you on the Assignment page on CourseWeb. Your output should match that
shown in RLHTest.txt.
More Important Notes:
1) When implementing these operations you may discover that it would be much easier to do them if
the underlying linked chain were bidirectional (i.e. a doubly-linked chain). This is absolutely true but
unfortunately you are required to use the singly-linked chain that is provided!
2) Both the add() and subtract() methods are tricky and have different cases to consider. For these
methods especially I recommend working out some examples on paper to see what needs to be
considered before actually coding them.
EXTRA CREDIT
Here are a couple non-trivial extra credit ideas. Either one done well could get you the full 10 extra
credit points. However, don't attempt either until you are confident that your required classes are
working correctly.
 Allow the numbers to be signed, so that we can have both positive and negative numbers. This
may require an extra instance variable (for the "sign") and will clearly affect many of your
methods. If you choose this extra credit, you must submit it as a separate class
(ReallyLongHex2) in addition to your original ReallyLongHex class. You must also submit a
separate driver program to test / demonstrate your signed ReallyLongHex2 class.
 Add a multiply() method to your ReallyLongHex class. If you implement this you should also
submit a separate driver program to test / demonstrate the multiply() method.
SUBMISSION REQUIREMENTS
You must submit, in a single .zip file, at least the following six complete, working source files for full
credit:
1. PrimQ.java
2. Reorder.java
3. Assig2A.java
4. RLHTest.java
The above four files are given to you and must not be altered in any way.
5. LinkedDS.java
6. ReallyLongHex.java
7
The above two files must be created so that they work as described. If you create any additional files,
be sure to include those as well.
The idea from your submission is that your TA can unzip your .zip file, then compile and run both of the
main programs (Assig2A.java and RLHTest.java) from the command line WITHOUT ANY additional files
or changes, so be sure to test it thoroughly before submitting it.
If you cannot get the programs working as given, clearly indicate any changes you made and clearly
indicate why (ex: "I could not get the reverse() method to work, so I eliminated code that used it") on
your Assignment Information Sheet. You will lose some credit for not getting it to work properly, but
getting the main programs to work with modifications is better than not getting them to work at all. A
template for the Assignment Information Sheet can be found in the assignment’s CourseWeb folder. You
do not have to use this template but your sheet should contain the same information.
Note: If you use an IDE such as NetBeans, Eclipse, or IntelliJ, to develop your programs, make sure
they will compile and run on the command line before submitting – this may require some
modifications to your program (such as removing some package information).
RUBRICS
Please check the grading rubric on CourseWeb.
HINTS / NOTES
1. See file A2Out.txt to see how your output for Assig2A.java should look. As noted, your output when
running Assig2A.java should be identical to this.
2. See file RLHTest.txt to see how your output for RLHTest.java should look. As noted, your output
when running RLHTest.java should be identical to this.
3. For Javadoc comments and code style, please refer to Appendix A of the textbook.

More products