Starting from:

$30

(P2): Reliable Datagram Protocol (RDP)

CSc361 Programming Assignment 2 (P2): Reliable Datagram Protocol (RDP) 


Objective: In this programming assignment, you will use the DATAGRAM socket (i.e., supported by UDP) in
Python to create a Reliable Datagram Protocol (RDP) transceiver (rdp.py, a combined sender and receiver)
running on H1 in PicoNet, to interact with a given echo server running on H2, over an unreliable link at R.
Schedule: There are four tutorials (T4, T5, T6 and T7) and three lab sessions (L5, L6 and L7) associated with
this assignment.
In T4 on October 7, the tutorial instructor will go through the P2 specification and answer possible questions,
as well as providing a basic RDP design for reference, so please read the P2 spec carefully beforehand.
In T5 on October 14, the tutorial instructor will check students P2 design on RDP connection management and
flow control, and provide feedback and instruction on how to do P2 in PicoNet with network impairments.
In L5 on October 17, 18, or 19, the lab instructor will go through TCP connection management and flow control
packet capture and analysis, help students form and refine their design for P2, and check their implementation.
In T7 on October 21, the tutorial instructor will check students P2 design on RDP error control, and provide
feedback and instruction on P2 submission and marking.
In L6 on October 24, 25 or 26, the lab instructor will go through TCP error control packet capture and analysis,
check students P2 implementation, capture and analyze RDP packets, and provide help if needed.
In T8 on October 28, the tutorial instructor will provide some last-minute reminders and help.
In L7 on October 31, Nov 1 or 2, the lab instructor will go through TCP congestion control, and check students
P2 implementation and testing, capture and analyze RDP packets, and provide help if needed.
Please follow our tutorial and lab schedule very closely for this assignment, which ensures its success and
smoothness. Please consider connection management and flow control first, and then error control.
Requirements: A basic RDP design is provided, and you can extend the design as you see fit. RDP follows
HTTP design, using full text, line-by-line control headers to establish (SYN) and release (FIN) connection, and
Sequence number in data (DAT) packet of PAYLOAD Length and Acknowledgment number in
acknowledgment (ACK) packet to reorder out-of-order packets, acknowledge received packets and identify lost
packets for retransmission. To be efficient, RDP cannot use stop-and-wait (i.e., transmit a packet, wait for
acknowledgment, and retransmit until it is received), and has to support flow control using Window size (i.e.,
multiple packets can be transmitted back-to-back within the Window, and lost packets will be recovered
through retransmission by timeout or three duplicate acknowledgments). You can model your RDP design after
TCP, but you do not need to implement the entire TCP. Congestion control is not needed for RDP in P2.
RDP packet format
COMMAND
Header: Value

Header: Value
PAYLOAD
where, COMMAND := SYN|FIN|DAT|ACK|RST, and SYN indicates to establish connection, FIN to close
connection, RST to reset connection, DATA to send data, and ACK to acknowledge received data.
Header := Sequence|Acknowledgment|Window|Length, and Sequence provides the sequence number
associated with the packet (the first byte of the PAYLOAD if any), Acknowledgment the sequence number
expected by the receiver (the next byte of the PAYLOAD if any), Window the size of the receiver’s window in
bytes, and Length the length of the PAYLOAD in bytes. Note that an empty line indicates the end of headers.
PAYLOAD, if existing, is the actual data sent from the sender to the receiver. PAYLOAD is at most 1024 bytes.
The Echo Server
On H2
mkfifo fifo
which makes a FIFO (named pipe) called fifo. you only need to run this command once at /home/jovyan
Then
cat fifo | nc -u -l 8888 > fifo
which runs nc (netcat) in UDP server mode at port 8888, redirects output to fifo, and pipes through fifo to nc.
To test the echo server, on H1
nc -u h2 8888
and type any input---it will be echoed back by H2 and shown on H1. Use tcpdump on R
tcpdump -n -l -i r-eth1 udp port 8888
to verify it.
Connection Management
The RDP sender sends SYN first to establish the connection with the RDP receiver, and the RDP receiver
sends ACK to accept the connection. Note that RDP is unidirectional from the sender to receiver, so the
receiver does not need to send SYN. After the data transfer is finished, the RDP sender sends FIN to close the
connection, which is acknowledged by the RDP receiver with ACK. Please note that COMMAND, Headers and
PAYLOAD are all case sensitive. For unrecognized or incompatible COMMAND and Headers (e.g., DAT
packets missing Sequence number and Length, ACK packets missing Acknowledgment number and Window,
and so on), RDP will reset the connection with RST, and there is no ACK for RST.
Data Transfer
Once connected, the RDP sender can send DAT (data) packets to the receiver, each with a Sequence number
header indicating the sequence number of the first bytes of the PAYLOAD, and Length indicating the size of the
PAYLOAD in bytes. The RDP receiver will acknowledge the received DAT packets cumulatively, using the
Acknowledgment header indicating the first byte expected in the next PAYLOAD, as well as the Window size.
How to emulate Internet delay
On R,
tc qdisc add dev r-eth1 root netem delay 100ms
will add 100 millisecond delay at the output queue of r-eth1.
Flow Control
The RDP receiver will advertise its receiver window in ACK packets with the Window header. The RDP sender
shall respect the Window size and shall not send any data with sequence number equal to or above
Acknowledgment+Windows.
How to emulate Internet delay and loss
On R
tc qdisc change dev r-eth1 root netem delay 100ms loss 25%
after the above command will add 100 millisecond delay and set 25% packet loss at the output queue of r-eth1.
Error Control
Once packet loss occurs, the RDP sender and receiver may miss SYN, FIN, DAT or ACK packets, so error
control is needed. The RDP receiver shall acknowledge received packet cumulatively, and the sender will
retransmit unacknowledged packets when timeout or after receiving enough duplicate acknowledgments.
How to run RDP
python3 rdp.py ip_address port_number read_file_name write_file_name
on H1 will bind rdp to ip_address and port_number to send or receive UDP packets, and to transfer a file with
read_file_name from the RDP sender to receiver saved with write_file_name. After the file transfer is finished,
diff read_file_name write_file_name
on H1 can tell you whether the received file is different from the sent file of length greater than 10,240 bytes.
What RDP outputs
In addition to saving the received file for diff, RDP shall also output a log to the screen in the following format
DATE: EVENT; COMMAND; Sequence|Acknowledgment: Value; Length|Window: Value
where DATE is timestamp and EVENT := Send|Receive. For example,
Sat Oct 01 16:54:09 PDT 2022: Send; SYN; Sequence: 0; Length: 0
Sat Oct 01 16:54:09 PDT 2022: Receive; SYN; Sequence: 0; Length: 0
Sat Oct 01 16:54:09 PDT 2022: Send; ACK; Acknowledgment: 1; Window: 2048
Sat Oct 01 16:54:09 PDT 2022: Receive; ACK; Acknowledgment: 1; Window: 2048
Sat Oct 01 16:54:09 PDT 2022: Send; DAT; Sequence: 1; Length: 1024
Sat Oct 01 16:54:10 PDT 2022: Receive; DAT; Sequence: 1; Length: 1024
Sat Oct 01 16:54:10 PDT 2022: Send; ACK; Acknowledgment: 1025; Window: 1024
Sat Oct 01 16:54:10 PDT 2022: Receive; ACK; Acknowledgment: 1025; Window: 1024
Sat Oct 01 16:54:10 PDT 2022: Send; FIN; Sequence: 1025; Length: 0
Sat Oct 01 16:54:10 PDT 2022: Receive; FIN; Sequence: 1025; Length: 0
Sat Oct 01 16:54:10 PDT 2022: Send; ACK; Acknowledgment: 1026; Window: 2048
Sat Oct 01 16:54:10 PDT 2022: Receive; ACK; Acknowledgment: 1026; Window: 2048
where the RDP sender sends a SYN packet with Sequence number 0, which is received by the RDP receiver,
and the RDP receiver sends ACK to accept with Acknowledgment number 1 and Window size 2048 bytes.
Next, the RDP sender sends a DAT packet with Sequence number 1 and payload Length 1024 bytes, which is
received by the RDP receiver and acknowledged with an ACK packet with Acknowledgment number 1025 and
Windows size 1024 bytes. The sender then closes the connection by sending a FIN packet with Sequence
number 1025, which is acknowledged by the receiver with Acknowledgment number 1026, so the connection is
closed. Please note that this example just illustrates a very simple case of transferring 1024 bytes reliably.
How to test and evaluate RDP
Run the echo server on H2, run tcpdump on R to capture the interaction between H1 and H2, and run rdp.py
on H1. It is very important to correlate the packet exchange between H1 and H2 and the endpoint reaction at
H1 for both the RDP sender and receiver through the RDP log, which can help you debug your code as well.
Although RDP sender and receiver are in the same rdp.py on H1, RDP protocol and logic cannot be bypassed.
What to submit: rdp.py source file, and the tcpdump files on R, showing the interaction between H1 and H2.
Please also copy&paste the content of rdp.py and tcpdump -r the capture file to the text input box on connex.
When: by Wednesday, November 2, 2022, 5pm through brightspace => assignments => p2
Questions and answers (Please read P2 Spec carefully first): brightspace => forums => p2
Academic integrity: This is an individual assignment so your submitted work shall be done by yourself alone.
Appendix A: How does PicoNet emulate an Internet with delay and loss?
Appendix B: A basic design for your reference

More products